B3300 Dual-Dispensing 3D Printer

$6,000.00

For Additional Payment Options, Email info@nano3dprint.com

-

Want to 3D print wearables, sensors, batteries, and other electronics? Meet the B3300, which 3D prints functional inks and pastes side-by-side.

3-D Print Electronics Icon

Make wearables, sensors, batteries, and other electronics.

Combine Materials Icon

Print full 3D patterns onto any substrate and combine materials.

Value Packed Shield Icon

Enjoy a significantly lower cost of ownership.

Print thin or thick layers – the B3300 has a viscosity range from 1mPa·s to 54000 mPa·s.

Innovative Solutions

Quickly print thick layers (500 microns) with high viscosity multi-materials in a single pass.

3D Print

Expand your range of printing materials - from Au and Ag, to UV curable polymers, to silicone.

  • Two Printheads

    Side-by-side Dual Materials Dispensing System

  • The Materials Dispensing System 3D Prints:

    Functional Pastes and Inks, Conductive Paints, Fast Drying Solvent Based Inks, Silver Nano-Particle Inks, Graphene solutions, and much more... Use materials such as conductive inks (Au, Ag, Cu, etc.), medical-grade silicone, polyurethane rubber and plastics, rigid and flexible urethane foams, epoxies, and UV-curable polymers.

  • Materials Dispensing System Viscosity Range

    Works with all inks and pastes with viscosities ranging from 1mPa·s to 54000 mPa·s. This is a low to high viscosity electronics printer.

  • Resolution

    Achieve a resolution of 200-microns, and attain even finer resolutions of up to 100-microns with specialty nozzles.

  • Syringe Size

    3 ml

  • Nozzle Size

    14 to 30 Ga (1.6 mm to 150 μm) Higher Resolution Available: 32 Ga, 34 Ga

  • Build Volume

    214 x 186 x 160 (mm) 8.4 x 7.3 x 6.3 (in)

  • Video Inspection System

    Real-time magnifying video inspection system for more precise adjustment control of the dispensing system.

  • Machine Dimensions

    467 x 357 x 374 mm

  • Machine Weight

    13 kg (28.66 lbs.)

  • Max. Heat Bed Temperature

    100°C

  • Max. Axis Moving Speed

    125 mm/s

  • Max. Nozzle Flow Rate

    15 cc/hour

  • Positional Accuracy

    XY axis: 0.011 mm Z axis: 0.0025 mm

  • Printing Layer Height

    0.05-0.3mm

  • Stage Material

    Removable Glass Heated Bed

  • Software / File Format / Operating System

    Compatible with Repetier-Host, Cura, Makerware, Simplify3D etc. / STL, GCODE, OBJ, DAE, AMF, BMP, JPG, JPEG, PNG / Windows, Mac, Linux

  • Connectivity

    Direct print with SD card using full-color touch screen (recommended); Flash Drive

Download Spec Sheet
  • Print Electronics

    Make wearables, sensors, and other electronics with our dual proprietary materials dispensing system. 3D print flexible electronics.

  • Use a Wide Range of Substrates

    Print on a wide range of substrates, sizes, or shapes to a depth of 1 cm.

  • Benchtop Sized

    Print from the comfort of your private workspace.

  • Video Inspection System

    Monitor your printing progress in real-time from your device to ensure your high resolution 3D designs print perfectly.

  • Enjoy Accurate 3D Prints

    Achieve accuracy in layer height, surface finishing, tolerance, and roundness.

  • Simple To Use

    Control the B3300 from your computer, smartphone or the full-color touch screen. It’s compatible with WIFI, USB, SD card, and U disk for direct printing.​

One B3300 3D Multi-material Electronics Printer
General Tools & Materials:
Allen Wrench (2 sizes)
Allen Wrench (key type, x3)
Screw Driver (x1)
Tweezer (x1)
Two Screws (for dispenser installation)
Dispenser/Syringe Adapter & Clamps for Plastic Syringe (x2)
Dispenser/Syringe Adapter & Clamps Glass Syringe (x2)
Empty Plastic Syringes (x5)
Syringe Caps (x5)
Transfer Adapters (x5)
Bed Clips (1 set)
Power Cable
Glass Bed
Dual Dispensing System
Video Monitoring System
Simplify3D Software License

YOU MAY ALSO LIKE…