![Conductive Paste (DW100-24)](https://nano3dprint.com/wp-content/uploads/2022/08/conductive-material.jpg)
Conductive Paste (DW100-24)
10cc of Silver Conductive Paste. It is a waterborne, low V.O.C., electrically conductive ink and coating, N-methyl Pyrrolidone free material....
$8,800.00
For Additional Payment Options, Email info@nano3dprint.com
-
Revolutionize your 3D printing experience with MatDep Pro and add conductive and functional ink into a 3D design in a single pass. With groundbreaking innovation, it features an FDM extruder and a materials dispensing system, each equipped with independent motion.
Make soft robots, rechargeable batteries, medical devices and more.
Use gold, copper, and a wide range of new materials.
Make the strongest 3D prints available with composite materials.
Enjoy a significantly lower cost of ownership than similar 3D electronics printers.
The FDM extruder and materials dispensing system are each equipped with independent motion.
Optimized Print Heads: FDM Extruder and Materials Dispensing System
The extruder and materials dispensing system assemblies move independently. Both print heads are automatically wiped cleaned after use.
PLA, ABS, PETG, POM, Nylon (PA), PC, Carbon Fiber filament, Dissolvable filament (PVA, HIPS), and Flexible filament (TPU, PLA+)
Functional Pastes and Inks, Conductive Nano- Particle Inks, Resistive, Dielectrics, Magnetic, Thermo-Electric, Photovoltaic, and Graphene Solutions
Achieve a resolution of 200-microns, and attain even finer resolutions of up to 100-microns with specialty tips on the materials dispensing system.
Works with all inks and pastes with viscosities ranging from 1mPa·s to 54000 mPa·s.
3 ml
14 to 30 Ga (1.6mm to 150μm) Higher Resolution Available: 30 Ga, 32 Ga, 34 Ga
0.4 mm (1.75 mm filament)
360x250x200mm or 14.17 x 9.84 x 7.87 inches
Stable and precise movement control
Yes
Real-time magnifying video inspection system for more precise adjustment control of the dispensing system.
630 x 430 x 625 mm
~ 92.5 lbs.
Max 120°C
Max 260°C
20-200 mm/s
24 cc/hour
XY axis: 0.011 mm and Z axis: 0.0025 mm
0.1-0.3 mm
Flexible Magnetic Build Mat
Compatible with Repetier-Host, Cura, Makerware, Simplify3D / STL and GCODE / Windows, Mac, Linux
USB/SD and Card/WiFi
Make PCBs. Wearable technologies. Conductors. Solar Cells. Flexible electronics. And beyond.
The FDM extruder and a materials dispensing system are each equipped with independent motion. The independently moving print heads are cleaned off after each use, eliminating cross-contamination and delivering better print quality, speed, and reliability.
Print on a wide range of substrates, sizes, or shapes to a depth of 1 cm.
Monitor your multi-material 3D printing progress in real-time from your device to ensure your high resolution 3D designs print perfectly.
Achieve accuracy in layer height, surface finishing, tolerance, and roundness.
Control the A2200 from your computer, smartphone or the full-color touch screen. It’s compatible with USB, SD card, and flash drive for direct printing.
General Tools & Materials:
▪ Allen Wrench
▪ Dispenser/Syringe Adapter & Clamps for Plastic Syringe (x1)
▪ Dispenser/Syringe Adapter & Clamps for Glass Syringe (x1)
▪ Empty Plastic Syringes (x5)
▪ Syringe Caps (x5)
▪ Transfer Adapters (x5)
▪ Filament Holder (x1)
▪ Filament Tube Guide (x1)
▪ Power Cable
▪ Mark III Dispensing System
▪ Video Monitoring System
▪ Simplify3D Software License (electronically delivered)
10cc of Silver Conductive Paste. It is a waterborne, low V.O.C., electrically conductive ink and coating, N-methyl Pyrrolidone free material....
Analog for conductive paste for practice / test print material. Prototype your prototype!
1kg of insulating filament for your general use and 3D printed electronics needs. Your choice of PLA or ABS.
3ml plastic syringes to transfer your own material. (5 per pack)